Close Menu

US Safety Equipment

US Safety Equipment

1514 Veshecco Drive
Erie, PA 16501

Products

199D Descent Control Device

The 199D can be used with a full body harness along with an appropriate fall arrest system. Used on a single 7/16in piece of approved rope, the operator can install the device at any point along the rope. As the lever on the device is moved, friction on the rope decreases and the descent is stopped. Comes with locking steel carabiner (FCP-354-2)

6' Internal Shock Absorbing Lanyard

The Internal Lanyard is ideal for use in welding applications. It includes an integrated shock absorbing component, high-strength snaphooks, and is a standard 6 feet in length. Its supremely durable Internal webbing and fire retardant shock absorber cover make it extremely resistant to sparks, heat, and abrasive surfaces, all of which are some of the most dangerous types of exposure for fall protection equipment.

Features

  • Ideal for use during welding operations
  • Removable Flame Resistnt protective cover
  • Dependable performance
  • Durable Kevlar webbing

6' Kevlar Shock Absorbing Lanyard

The Kevlar Lanyard is ideal for use in welding applications. It includes an integrated shock absorbing component, high-strength snaphooks, and is a standard 6 feet in length. Its supremely durable Kevlar webbing and fire retardant shock absorber cover make it extremely resistant to sparks, heat, and abrasive surfaces, all of which are some of the most dangerous types of exposure for fall protection equipment.

Features

  • Ideal for use during welding operations
  • Removable Flame Resistnt protective cover
  • Dependable performance
  • Durable Kevlar webbing

Adjustable Lanyards

The "Adjustable Lanyard" is ideal for positioning and restraint situations. This lanyard can be quickly adjusted from 4 feet to 6 feet in length. This product is available with a shock absorber.

Features

  • Ideal for positioning and restraint situations
  • Quickly adjusts from 4 feet to 6 feet
  • Available with or without shock absorber

ANSI High Strength Aluminum Snap Hook

We are pleased to announce our new line of aluminum, ANSI and OSHA compliant snaphooks and rebar hooks. Aluminum is corrosion resistant and lighter than steel, and aluminum connectors are now available on all lanyards, SRLs, and vertical lifelines. They are created and tested to comply with the most current ANSI regulations. These light weight connectors have high-strength, double-locking gates certified for loads up to 3,600 pounds, as well as an ultimate load rating of 5,000 pounds.

Features

  • Each hook gate mechanism is rated at 3,600 lbs.
  • Aluminum construction ensures longer service life and makes these products 35% lighter than other models in the market
  • Standard gate sizes (Rebar hook - 2 1/2 inch; Snap hook - 3/4 inch)
  • Double locking gates

Big Boss Extended Free Fall Lanyard

The Big Boss Extended Free Fall Lanyard is the new heavy duty lanyard option in our line of products. for workers within the worker capacity range of 130-310 pounds, the Big Boss can be used as an extended free fall lanyard for free falls up to 12 feet. And for workers between the capacity range of 310-420 pounds, it can be used as a standard shock absorbing lanyard for free falls up to 6 feet.

Features

  • Extended Free Fall Lanyards
  • 1″ Nylon webbing is light & durable
  • Clear shock absorber pack for easy inspection
  • Standard with 3,600 lb. Steel Rebar or Standard Steel Hook
  • Complies with the ANSI .13 Standard

Cable Grab

This Cable Grab is incredibly simple to install onto any 3/8 inch thick vertical cable (5/16 inch version available), and is designed to lock automatically the moment a fall occurs. Simply squeeze the Cable Grab to reposition, and release to lock the device. The Cable Grab may be attached to with any compatible 18 inch extension lanyard.

Features

  • Stainless steel cable grab fits 3/8 inch thick cable
  • Lock automatically when a fall occurs
  • Squeeze to move positioning device
  • Easy to Install

Cable Lanyard with Flame Resistant Cover

Comprised of an ultra-durable, vinyl coated cable, the Cable Lanyard is perfect for use in welding applications and other harsh environments. It can be used over sharp or abrasive edges and surfaces, is available in both single and double leg models, and comes with an integrated shock absorbing component. It also offers the added feature of a removable, flame resistant cover over the shock absorber for additional protection against sparks and heat.

Features

  • Ideal for welding applications
  • Removable flame resistant cover for safety inspection of shock pack
  • Vinyl coated cable for added protection from welding slag or sparks
  • Double swagged ends for added safety
  • Durable inspection tag for monthly use

Extension Lanyard

The Extension Lanyard offers the convenient option of lengthening a full-body harness dorsal D-ring, making it easier to attach to. The snaphook component of the Extension Lanyard attaches directly to the dorsal D-ring, and then the Extension Lanyard D-ring becomes the new harness connection point. This product is ideal for workers who cannot comfortably reach their harness dorsal D-ring, though it is always important to consider the 18 inch fall clearance and free fall increase when this lanyard is in use.

Features

  • Attaches to the harness before use
  • Used to lower the lanyards attachment point to waist level
  • 18 inches in length

Non-Shock Absorbing Lanyard

The Non-Shock Absorbing Lanyards are available in a variety of lengths, from 2 feet to 6 feet, and connector options, including snaphooks and rebar hooks. Because they do not include a shock absorbing component, these lanyards are for use in Work Positioning and Restraint applications only. They are comprised of a supremely durable nylon material, and allow for attachments to anchorage connectors of all kinds.

Features

  • For positioning and restraint only
  • Durable Nylon
  • Allows workers to attach to an anchorage point or system with enough length to safely complete the job

Poly Steel Rope Assemblies

The Poly Steel Rope is ideal for high-moisture environments. Nylon rope, when wet, will typically reduce in strength by between 10% to 15%, but unlike Nylon, Poly Steel Rope does not absorb water, so will not diminish in strength in wet conditions. This rope is also particularly strong when it comes to resisting damage from ultraviolet light, and its synthetic composition makes it especially resistant to cuts and abrasion, thereby increasing equipment lifetime. Poly Steel is ten times stronger than Polypropylene, and while it may become fibrous, this is just a result of normal wear, and does not indicate it needs to be replaced. It is 5/8 inches thick, and is available with a variety of component configurations, including a shock absorber, positioning device, 18 inch extension lanyard, and 2 double-locking snaphooks.

Includes

  • Heavy duty poly rope
  • Resists cuts and abrasions
  • Assemblies include poly steel rope and double locking snap hook end
  • Also available with shock absorber, positioning device, 18-inch extension lanyard and an additional double locking snap hook

Polyblend Lifeline Assemblies

Product Description

These lifelines are constructed of a 5/8 inch 3-strand polyblend synthetic rope. Designed for excellent wear, strength and limited stretch, these lifelines will keep you safe for a very long time.

Includes

  • 3 strand Polyblend rope
  • 410 Models come with locking steel snap hooks on both ends
  • 411 Models come with a locking steel snap hook on one end and a thimble on the other end

Rope Grabs

This Rope Grab is easy to install and is designed to lock automatically in the event of a fall. Rope Grabs are available in a variety of configurations (see table below), are compatible with ropes from 5/8 to 1/2 inches thick, and are supremely durable.

Includes

  • Removable rope grabs are easy to install
  • Fits 5/8" or 1/2" thick safety ropes
  • Lock automatically when a fall occurs

Shock Absorbing Lanyard

The Shock Absorbing Lanyard is the premiere free fall lanyard offered by our company. It meets all the stringent ANSI Z359.13-2009 regulations, and the integrated shock absorbing component limits average arresting forces to 900 pounds or less. It is comprised of 1 inch nylon webbing, and is available in a variety of lengths and connector options, including steel and aluminum snaphooks and rebar hooks, all of which make it one of the most functional and durable lanyards on the market.

Features

  • 1" Nylon Webbing
  • Clear shock absorbing pack for easy inspection
  • Always ANSI compliant 3,600 lb. Steel Rebar Snap hooks, Aluminm Rebar Snap hooks, Standard Steel Snap hooks or standard Aluminum Snap hooks
  • 100% of the lanyards meet the ANSI .13 requirements

Shock Absorbing Stretch Lanyards

The Stretch Lanyard is ideal for work in tight spaces or around machinery, since its stretching capability helps reduce hazards of tripping or catching on moving parts. This lanyard stretches from between 4—1/2 to 6 feet, and is available in a variety of connector options, as well as both single and double leg models. It is supremely lightweight, and its unique design eliminates the need for an external shock absorber.

Features

  • Stretch design lessens the potential of tripping, dragging and snagging during work
  • Lightweight
  • Compliant with ANSI Z359-2007

Stamped Steel Snap Hook

The Stamped Steel Snap Hook is specially designed to be both supremely durable and easy to use. Its gate is certified to withstand loads up to 3,600 pounds, is self-closing and self-locking, and can be opened with just one hand. All Stamped Steel Snap Hooks are compliant with the most current ANSI regulations.

Features

  • Easy to use one hand operation
  • Securely attach lanyards or lifelines to anchorages
  • Offer maximum strength to 5,000 pounds

Tie-Back Lanyard

The innovative design of the Tie-Back Lanyard eliminates the need for a separate anchorage connector. The leg of the Tie-Back Lanyard functions to loop around a compatible anchor point, with the snaphook component connecting to the leg D-ring. The integrated shock absorbing component and snaphook then connect to the full-body harness dorsal D-ring, creating a complete PFAS. The adjustable D-ring tie-back point, as well as the single and double leg options, further increase the versatility of this lanyard.

Features

  • Eliminates the need for a separate anchorage connector
  • Adjustable tie-back point allows anchorage size versatility

Tiger Tail Stretch Lanyard

The Tiger Tail Stretch Lanyard is ideal for Fall Arrest applications in tight spaces or around moving machinery, since its stretching capability helps reduce hazards of tripping or catching on moving parts. This lanyard stretches from between 4—1/2 to 6 feet, and includes an integrated shock absorbing component. It has been consistently tested to reduce forces of arrest to fewer than 900 pounds, and has one of the most consistent deployment rates of any stretch lanyard on the market. It is available in both single and double leg models, as well as with a variety of connector options.

Features

  • Stretch design lessens the potential of tripping, dragging and snagging during work
  • Tested to reduce fall forces to fewer than 900 pounds

Live Chat
Social
Show Reader Hide Reader