The Wright Stuff, Inc.
Products
Cutting Board with Pivot Knife
The Cutting Board with Pivot Knife is a cutting board with a special hinge that allows the attached knife to chop through an arc of 90 degrees. People with the use of one hand, individuals with upper extremity, fine motor or grasping disabilities, or tremors will find this adapted food preparation board easy to use.
The Cutting Board with Pivot Knife combination increases safety in the kitchen. The food-grade cutting board secures to the work surface with 4 suction cups that help to prevent it from sliding during use. The chef knife attaches to the cutting board with a pivot hinge to control the chopping motion. The chef knife has an ergonomically shaped handle for easier grasping and a stainless steel blade. The included chef knife removes easily for washing or sharpening.
- Knife can be removed for cleaning and sharpening.
- Designed for use by individuals with upper extremity, fine motor or grasping disabilities or tremors.
- 4 suction cups at the bottom secure the board to the counter.
- Board Measures: 12 inches wide, 12 inches deep.
- Care: Dishwasher-safe.
- Made of: Durable, sanitary polyboard.
Easi-Grip Grater
The Easi-Grip Grater is an adapted grater with a large upright handle that allows more pressure to be applied while grating. The handle is large and comfortable to hold and has a soft, non-slip grip that provides increased control.
The Easi-Grip Grate handle is made with a soft feel molded plastic, which provides a firm comfortable grip in either hand. The stainless steel grater is set at 90 degrees from the handle, keeping the hand and wrist in a neutral stress free position. The grater measures 5 inches long and 2.25 inches wide. People with limited hand strength will find the Easi-Grip Grater helpful in the kitchen to make food preparation easier. The Easi-Grip Grater is comfortable for everyone to use, but is particularly beneficial for those with weak hands or wrists.
- Soft feel, large grip upright handle
- Angle of handle keeps arm, wrist, and hand in a stress free position
- Dishwasher safe
- Length: 5 inches.
- Width: 2.25 inches.
- Care: Dishwasher safe.
EZ Off Jar Opener
The EZ Off Jar Opener is an under the cabinet jar opener that opens a variety of jars and bottles. A simple twist allows this jar opener to grab hold of any lid whether it's factory sealed, child proof, tamper proof or just stuck.
The EZ Off Jar Opener opens a variety of jar lid sizes from small bottles like a bottle of water or a jar of nail polish up to a wide container of pickles, peanuts, home canned fruits, jams, or molasses. It is easy to install the EZ Off with the pre-attached peel-and-stick adhesive and the 3 included screws. People with limited hand strength, amputees, will find this jar opener easy to use and helpful in the kitchen. This jar opener hides neatly out of sight under a cabinet, cupboard, counter, or shelf, taking no valuable storage space. The EZ Off Jar Opener is the original under-the-cabinet jar opener that allows users to open tough lids effortlessly.
- Opens lids: Small fingernail polish bottles to a 6 inch wide-mouth jar.
- Materials: Blades are a composite metal, base is made of plastic.
- Measures: 8 inches long, 9 inches wide, 1 inch high.
- Includes: EZ Off Jar Opener, adhesive, 3 screws for mounting under cabinet.
- Made in: USA.
Pan Holder
The Pan Holder is a kitchen aid that helps make stirring a pan with one hand easier. The wire frame holds the handle of a pot or pan while the user stirs the contents.
The Pan Holder wire frame is covered with epoxy to protect cook top ranges and pans from scratches. The holder is designed to help prevent spills by preventing the pan from accidentally turning. Three suction-cup feet secure the holder on the stove. Two vertical rods hold the handle to keep the pot or pan from spinning while contents are being stirred. The Pan Holder works best on electric stoves and holds handles up to 5 inches above base. The frame measures 10.5 inches long, 9 inches deep, 5.5 inches high.
- Measures: 10.5 inches long, 9 inches deep, 5.5 inches high.
- Material: Epoxy coated steel wire with suction cups.
Scooter Joystick Cover
The Scooter Joystick Cover slips over the joystick of a scooter or electric wheelchair to protect it from moisture. Exposed areas around the joystick of a power wheelchair can allow moisture enter and cause electrical problems. This thoughtfully designed cover provides protection from moisture.
The Joystick Cover has a clear plastic that allows the user to easily see the scooter controls. An adjustable buckle allows the user tighten the cover closely around the armrest and joystick, or leave it loose enough to slide your hand into the cover so that it stays warm and dry too. The Joystick cover is made in the USA from high-quality durable nylon with urethane coating, for years of durable moisture-resistant use. The cover measures 14 inches long, 5 inches wide, 4 inches deep.
Soft Basket for Scooter Tillers
The Soft Basket for Scooter Tillers is a zip top scooter bag with front mesh pockets. Scooter users who find putting their items in a wire basket is not safe will find this front mount bag helpful.
The Soft Basket for Scooter Tillers has the same cubic inch holding capacity as a standard wire basket. The durable scooter accessory basket is constructed of high quality water resistant fabric and is made in the USA. The Soft Basket measures 12 inches wide, 11 inches long, 8 inches deep.
Swedish Cutting Board
The Swedish Cutting Board is ideal for people who have had a stroke or have neurological impairments that limit them to the use of one hand. This adapted food preparation board has stainless steel spikes that hold food for cutting or slicing. It also features a vise to hold larger food items, jars or mixing bowls.
- Stainless-steel spikes hold vegetables and fruits for slicing.
- Rubber suction feet adhere the board securely in place.
- The vise can be used to hold mixing and salad bowls, or jars while opening lids.
- Measures: 12 x 11 inches.
- Weighs: 3 lbs.
- Care: Clean with soap and water.
Wheelchair Hand Grip Extensions
These Wheelchair Hand Grip Extensions extend the height of wheelchair push handles by 5 inches. Raising the height of the wheelchair push handles makes it easier for the person pushing the chair to stand up straight, helping to prevent back injuries.
The existing hand grips on the wheelchair do not need to be removed when installing these extenders. The Wheelchair Hand Grip Extensions are sold in pairs and fit most standard wheelchair hand grips.
