Close Menu

McMaster-Carr

McMaster-Carr

200 Aurora Industrial Pkwy.
Aurora, OH 442028087

Products

Abrasive Antislip Tape

Apply this general purpose tape to any surface that requires traction. It has an adhesive backing and can be walked on immediately after installation.

Adjustable-Height Clean Room Stools

These stools meet Class 10 clean room requirements. Their chrome-plated, all-steel construction is durable and easy to clean.

Adjustable-Height Multi-Step Steel Work Platforms

Get easy access to elevated areas. Plus, a large platform allows plenty of space for working. You can lower the platform up to 3" by sliding the U-bolts. Platform and steps are serrated for maximum slip resistance and to allow dirt and debris to fall through. Steps are 36" Wd. × 9 1/2" Dp. and adjust for equal vertical spacing. Legs and handrails are made of 1 1/4" dia. tubing. Platforms have a gray finish. Shipped unassembled. Capacity is 500 lbs. Meet OSHA requirements.

Air-Powered Stationary Lift Tables

Connect these tables to your compressed air system; a hydraulic pump and an air-driven motor make repetitive lifting and positioning less of a chore. Tables have a compact design, so they fit in confined spaces.

Angled Hand-Crank Mobile Lift Tables

Move this table where you need it, then turn the hand wheels to adjust the load and tilt it up to 30° for a more ergonomic angle. Brakes on two of the casters keep the table stationary.

Antislip Tape

Help prevent injuries from slipping and falling.

  • Grit sandpaper surface with adhesive back.
  • Temperature range -20° to 150°F.

Deburring Scrapers

Various options for changeable deburring scrappers. Also known as machinist’s scrapers.

Drum Handlers

A wide variety of drum handling materials, including drum trucks, fork-mounted drum movers, and drum slings.

Electric Stationary Lift Tables for Tight Spaces

These tables are compact, yet provide the lifting capacity of standard lift tables. They have an electric motor and a hydraulic pump to perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.

Floor-Load Electric Stationary Lift Tables

The tabletop can go as low as 3", making loading and unloading from the floor and pallets easier. Tables have an electric motor and a hydraulic pump that perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control. A toe guard at the base of the table provides safety for the operator.

Fold-and-Carry Work Platforms

Take your platform anywhere. Folding legs and a carrying handle make this lightweight platform easy to transport. Legs fold up and under the platform and lock in place with safety clips. Frame is aluminum; deck is plywood with a slip-resistant coating. One 2 1/8" Dp. step at each end lets you climb up from either side. Shipped assembled.

Foot Switches

Press these switches with your foot for convenient, hands-free operation.

Switches with front pivot reduce user fatigue.

Switches with a three-prong outlet let you plug a device directly into the switch.

Foot-Operated Mobile Lift Table

Move these tables where you need them, then adjust your work to a comfortable height. They have a foot lever and hydraulic pump to raise loads and either a hand valve or hand lever for controlled lowering.

Post-style lift tables have posts that raise the tables straight up—no pinch points like scissor-style lift tables.

Tables with floor lock stay stationary while in use.

Table with relief valve has a valve to prevent pressure build-up and provide overload protection.

Foot-Operated Mobile Lift Tables

These tables have a foot lever and hydraulic pump to raise loads and either a hand valve or hand lever for controlled lowering.

Post-style lift tables have posts that raise the tables straight up—no pinch points like scissor-style lift tables.

Tables with floor lock stay stationary while in use.

Table with relief valve has a valve to prevent pressure build-up and provide overload protection.

Foot-Operated Stationary Lift Table

Make repetitive lifting and positioning less of a chore. These tables have a foot lever and hydraulic pump to raise the load. A hand knob provides controlled lowering. All have a compact design, so they fit in confined spaces.

General Purpose Incandescent Strobe Light

The light pattern draws attention to machine issues and work hazards. All lights meet NEMA 4X for outdoor use and washdown environments. Lenses are polycarbonate.

Inspection Mirrors

Position these mirrors to your exact requirements—they're 360° adjustable and have a telescoping handle (except 6" long handles) with plastic grip, unless noted. Round 7/8" and 1 1/4" dia. mirrors have a pocket clip.

Manhole-Cover Lifters

A long handle gives you the leverage to safely remove manhole covers by yourself.

Lifter with chain lift is adjustable to fit most covers. It includes a chain and hook to attach to the side openings of the manhole cover.

Lifter with magnet lift has a retractable handle that can be adjusted to lift at various angles. It folds up for easy storage and has two wheels for easy transportation. Requires a lifting magnet (sold separately).

Platform Step Ladders

Perfect for prolonged standing, these ladders have a large ribbed aluminum platform that's more comfortable than a step. Steps are also ribbed aluminum. Ladders fold for storage. Meet OSHA requirements.

Shatter-Resistant Convex Safety Mirrors

Acrylic mirrors are lightweight and more impact resistant than glass mirrors. If broken, the mirror will split into a few large pieces rather than small, sharp shards.

Steel Fold-Away Mobile Work Platforms

Height adjusts in 12" increments for multiple uses. Lock work platform in place by tightening the back brace's bolts. Then fold it up for convenient and portable storage. Work platform has a yellow finish and comes with two 10" wide steel planks that have a non-slip surface. Has four locking swivel casters. Capacity is 400 lbs.

Telescoping Multifunction Ladders

Easily configure these ladders into a step ladder, a straight ladder, a stairwell ladder, or two scaffolding stands. Ladders consist of a straight inner ladder and a flared-base outer ladder, connected with hinge locks. When used as scaffolding stands, use with 12" wide planks placed at 3 ft. from the ladder base. When used as scaffolding stands, fiberglass ladders require brackets, sold separately. Meet OSHA requirements.

Vehicle Mirrors

Promote driving safety with these indoor/outdoor mirrors.

Vibration-Resistant Incandescent Strobe Light

The light pattern draws attention to machine issues and work hazards. All lights meet NEMA 4X for outdoor use and washdown environments. Lenses are polycarbonate.

Vibration-Resistant Incandescent—These lights have a shock-absorbing base. All come with mounting fasteners. 120V AC light has two 15" wire leads. 12V and 24V DC lights have two 30" wire leads.

Employer Live Chat
Show Reader Hide Reader
MyJAN